BIG UP!

Terms And Conditions

BIG UP! Production Support Service Terms of Service

  1. Original Language：

    Basically, the original (Japanese) takes legal precedence, and the translated version is treated as a reference translation.

  2. Importance of Original Documents：

    The language of the original shall take legal precedence. Translated versions are for reference purposes only, and legal interpretation is subject to the terms and conditions of the original.

  3. Notification of Translated Version ：

    These Production Support Service Terms and Conditions have been translated using machine translations and we are limited in our responsibility for the accuracy of the translation.

Chapter 1 General Rules

Article 1 (Terms and Conditions)

  1. Service Service Service BIG UP! Production Support Service Terms and Conditions (hereinafter referred to as "this Terms and Conditions") is provided by Avex Music Creative Inc. (hereinafter referred to as "the Company") with respect to "BIG UP! (hereinafter referred to as "BIG UP!"), the following terms and conditions apply to members who use Service and members who apply to use .
  2. When the member applies for the use of the Service, it is considered that he / she has agreed to Terms and Conditions
  3. If the member is a minor, the consent of the parent or guardian must be obtained after confirming the contents Terms and Conditions the parent or guardian of the member in advance. In addition, if the member is a minor, it is assumed that the consent of the parent or guardian has been obtained at the time of using Service
  4. Unless otherwise specified, this Terms and Conditions applies when using the Service
  5. This Terms and Conditions matter with no defined in the, BIG UP! Specifies otherwise our Terms and Conditions shall be applied.

Article 2 (Change of Terms and Conditions

  1. We, the present Terms and Conditions and, if it conforms to the common interests of the user or the Terms and Conditions may be changed in the case that it does not interfere with the purpose of. In this case, the user will be subject to the Terms and Conditions Examples of changes are as follows, but are not limited to these.
    1. 1. Addition of new functions
    2. 2. Specification changes
  2. When the Company makes a change in the preceding paragraph, the Company shall determine the effective time of the change, and inform the user that this Terms and Conditions will be changed, Terms and Conditions, and the effective time of the change. We will inform you by displaying on the homepage or other methods specified by our company.

Article 3 (Application for use)

The member shall be able to apply for the production support service by the method specified by the Company.

Article 4 (Scope of application)

Production support service is a service that requires member registration.

Article 5 (Service content)

Membership, production support Service as the following of each item of Service you are entitled to. In addition, we shall be able to do these through our group companies.

  1. (1) Consultation and answers regarding master production to our staff
  2. ② Mastering utilizing the studio operated by our company
  3. ③ CD / DVD / Blu-ray Disc press Service (specified in Chapter 2)
  4. ④ Others, which are separately determined by the Company and posted on this website, this application, etc.

Article 6 (Usage fee)

When the member uses the production support service, we will pay a usage fee specified separately by the Company.

Article 7 (Other provisions)

When a member uses a Service other than BIG UP! Provided by the Company in connection with the production support Service Terms and Conditions of Service apply, and the member shall comply with them.

Article 8 (Contact)

The contact information for the production support Service and this Terms and Conditions
Avex Music Creative Inc.
Email: support@big-up.style

Chapter 2 CD / DVD / Blu-ray Disc Press Service

Article 9 (Scope of application)

The provisions of this chapter shall apply to members who use the CD / DVD / Blu-ray press Service (hereinafter referred to as "press Service") specified in Article 5, item 3 and members who have applied for use. I will.

Article 10 (Provision of creative masters, etc.)

Members shall provide the Company with the content such as the creative master or other songs and videos for which the press Service to be entrusted (hereinafter referred to as "creative master, etc." in this chapter) by the method specified by the Company. In addition, Label is outsourced, the print data for printing the Label Label data" in this chapter) shall also be provided by the method specified by the Company.

Article 11 (Contract establishment time)

  1. The member sends to the Company an application form stating the product name, quantity, delivery location, and other matters Service Service consignment contract shall be concluded when the member is reached by sending the e-mail of.
  2. As a result of our examination, we may refuse the application for use Service
  3. The delivery location is limited to Japan in Japan, and the press Service is available only to those who live in Japan in Japan.
  4. After concluding the press Service consignment contract, the member Label data when consigning the printing of Label data) to the company by the prescribed method.

Article 12 (subcontracting)

The Company shall be able to subcontract all or part of the business related to the Service

Article 13 (Inspection period)

  1. The Company shall deliver the deliverables created by the Service to the members by the delivery deadline specified by the Company. In addition, the shipping fee for delivery shall be borne by the member.
  2. Members must inspect for defects within one week (hereinafter referred to as the "inspection period") from the day following the day when the deliverables are delivered by the Company (the day when the members receive the deliverables). Must be. If there is a defect, we shall offer to our company that there is a defect within the inspection period.
  3. If a defect is found in the deliverable based on the preceding paragraph, the Company and its members will discuss and investigate the cause, and the Company will repair or replace it free of charge and complete it. However, if it is recognized that the defect should be attributed to the member's responsibility, the Company shall be exempted from liability.
  4. The free warranty for our deliverables shall be limited to the inspection period.

Article 14 (Change of delivery deadline)

If it becomes necessary to change the delivery deadline due to a natural disaster or other reasons not attributable to us, we may change it upon Notification to the members.

Article 15 (Change of inspection period)

If the delivery deadline is changed according to the preceding article, the inspection period of Article 13 shall be changed accordingly.

Article 16 (Guarantee of copyright, neighboring rights, etc.)

  1. The member shall guarantee to the Company the matters specified in each of the following items.
    1. (1) Do not infringe the copyrights, neighboring rights, portrait rights, or any other rights of others with respect to the original master, etc. and Label
    2. (2) When a member uses the press Service he / she must have obtained all necessary permission from a third party who has a legitimate right regarding the original master, etc. and the Label Etc. Includes, but is not limited to, permission from the management company.)
  2. If a third party makes any request or objection to the Company or its group companies in the event of violating the member's guarantees or obligations stipulated in this Terms and Conditions We shall handle and resolve this at the expense of, and guarantee that we will not bear any responsibility or expense to our company or our group companies. However, the Company shall be able to take measures to resolve the dispute by itself at its own discretion, and in this case, all damages and expenses incurred by the Company (including attorney's fees and other expenses required for dispute resolution). (Not limited to this) can be charged to the member.

Article 17 (Prohibited matters)

When the member uses the press Service, if the company determines that it falls under or may fall under any of the following items, the company may refuse to use the Service If it does occur, the member shall compensate for the damage caused to the Company.

  1. (1) The original master, etc. and Label data are child pornography and other obscene materials.
  2. ② Interfere with the operation of the Service
  3. ③ Infringe the copyright, neighboring rights, intellectual property rights of trademark rights, privacy rights or portrait rights, property rights, etc. of the Company or others.
  4. ④ Damage the honor and credibility of others
  5. ⑤ Delay payment of Service
  6. ⑥ The usage qualification has been revoked in the past due to violation of the BIG UP! Terms and Conditions and these Terms and Conditions
  7. ⑦ Unreasonable demands such as violent words and deeds against the Company and notifications that cause harm have been made.
  8. ⑧ Violation of laws and public order and morals
  9. ⑨ Other acts that violate Terms and Conditions
  10. ⑩ In addition to the preceding items, the Company press Service view of the scope and spirit of the press by the member Service that is not appropriate use of

Article 18 (Natural disasters, etc.)

Natural disaster, transportation strike, traffic conditions, such as road, rail, aviation, law instruction, administrative measures, by other unavoidable reason, the press Service if the performance of work related to becomes impossible, the Company press Service of the work related to the If we determine that it is impossible to continue to perform, we may cancel the contract regarding the consignment of the press Service Notification

Article 19 (non-guaranteed)

We do not guarantee that the deliverables created by our press Service have reached the level expected by the members or are suitable for a specific purpose. However, this does not apply unless otherwise specified Terms and Conditions

Date of enactment: October 17, 2016
Revision date: April 21, 2017
Revision date: January 12, 2018
Revision date: March 13, 2020
Date of revision: August 1, 2023